About the Adventure Mode category
Dispensing Other Materials
Apply solder paste to commercial printed board eg OSHPark
Adjust the Bake time of the Conductor Ink?
Printing Soldermask/ Solder-Resist?
Using Inktech Gloss Enamel as a resist
Double sided flex PCBs? Drill does that!
Printing conductive ink on PCBs printed with FormLabs High Temp resin
Rivets, rivets, everywhere rivets
Bulk Copper Deposition
Real board with riveted vias
Vias (or "Use the ink, Luke!")
Open Source Heads
Reflowing both sides using different solder paste
150 micron nozzles - Tips and Tricks
Dispense in 3D Space - Target 3001
Solvent for Silver Conductive Ink
Using Voltera with Thermal Clad Material
Fine pitch footprints (0.5 mm and lower)
220V in 110V regions or vice versa
Raising the solder dispenser a little higher as it moves
Double sided boards: Plated-through Holes (PTH)
Reflow with manually applied paste
next page →