Voltera Community

Getting Started / FAQ

The Perfect Print (Guide) (14)

About the Getting Started / FAQ category (1)

Best Practices for Rivets (2)

What happened to the text labels on the clamps? (2)

Cleaning a finished board (1)

Flex Conductor - To Burnish or Not to Burnish? (5)

Advice required for a Newbie on 2 sided Board Design (3)

Is this what the print is supposed to look like? (8)

Reflow Oven Temperature for Baking (instead on V-One baking) (3)

Joints weird. Not enough burnishing? (3)

Best drill press for making vias? (4)

Is 0603 components straight forward to work with? (4)

Ink storage temperature? (4)

Hello World - Tips and Tricks! (14)

What Happens When the Ink is Beyond the Shelf Life (6)

Ink Oozing after printing (4)

Printing Hatched Planes (Guide) (9)

Jump straight to the bake step? (3)

How to export Gerbers with Eagle? (10)

How to export Paste (GTP) files with KiCad (3)

My Gerber file won't load! (1)

Rotate the plunger back during dispenser assembly! (2)

How to export Gerbers with Mentor Graphics? (4)

Remember to clean the machine! (5)

Can I dispense solder paste on a rotated board? (3)

How to preview a circuit without connecting the V-One? (7)

Should the ink and solder paste reach room temperature before using? (2)

Reflow profile for V-One solder paste? (3)

Can I use solder paste to create traces? (5)

Trace width vs Current (3)

Powered by Discourse, best viewed with JavaScript enabled