We've updated print and solder settings in v0.15.0. The new settings will replace any settings changes you have made to date. You can retrieve your changes (more on that below).
What changed and why?
- In Print, the dispense height went down from .1mm to .08mm -- this will improve print quality for prints
- In Solder, the pass spacing was reduced from 0.18mm to 0.15mm -- this improve pad filling for solder
- In Print, the kick (i.e. how much we compress the ink when dispensing) increased from 0.2 to 0.4mm -- this will have little impact with the current ink but is necessary for the next batch of ink.
How can I retrieve my settings?
The settings you had prior to updating the app can be found in
- On Windows:
- On Mac: